Возврат к шагу #7
Отредактированно Spencer Pennington -
Правка одобрена автор Spencer Pennington
- До
- После
- Без изменений
Шаг Линий
| [title] Press the adhesive into place | |
| - | [* red] Make sure the liner is properly |
| + | [* red] Make sure the liner is aligned properly by checking that all spring contacts and the front-facing camera are in their cutouts. If they aren't, remove the adhesive and start over with a new sheet. |
| [* black] Use the flat end of a spudger to press the adhesive firmly into place all around the iPhone. | |
| [* icon_caution] Be careful not to press on the camera, spring contacts, or other internal components. |