Возврат к шагу #2
Отредактированно Josh Yacktman -
Правка одобрена автор Josh Yacktman
- До
- После
- Без изменений
Шаг Линий
| + | [* black] To separate the shell halves there are two options: |
|---|---|
| + | [* black] 1. Use an opening pick and insert it between the IR sensor and other stuff halve prying them apart |
| + | [* black] 2. push up on the rail towards the shell halve being removed (be careful as there is a ribbon cable connecting the rail to the halve we’re separating from |
| + | [* black] With the shell halves separated, carefully put the side with the rail next to the other halve making sure not to hurt the ribbon cable |