Перейти к основному содержанию

Возврат к шагу #21

Отредактированно Josh Yacktman -

Правка одобрена автор Josh Yacktman

До
После
Без изменений

Шаг Линий

[* black] Carefully remove the joystick liner by pulling up on it with tweezers and lightly pulling on the sections adhered to the upper chassis
[* icon_note] One of the adhered sections is under the motherboard of this controller so be patient removing the liner
+[* icon_note] Note for reassembly: Try reattaching this when the mainboard is not connected as it it difficult to get one of the adhered sections under the mainboard