Перейти к основному содержанию

Возврат к шагу #14

Редактировать с помощью Kon -

Правка одобрена автор Kon

До
После
Без изменений

Шаг Линий

[* black] Because of the flex cable of the LCD it is not yet possible to remove the it.
-[* black] Take a sharp small knife or a razor blade to cut those flex cables close to the LCD. Start where the upper red arrow starts and work your way down to the second arrow. Now you can remove the LCD
-[* black] On the other side you can now identify the old flex cables that you just cut loose. You will to remove those as well. Take a look at the next steps
+[* black] Take a sharp small knife or a razor blade to cut those flex cables close to the LCD. Start where the upper red arrow starts and work your way down to the second arrow. Now you can remove the LCD.
+[* black] On the other side you can now identify the old flex cables that you just cut loose. You will to remove those as well. Take a look at the next steps.