Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #10

Редактировать с помощью Jonathan Goldsmith -

Правка отклонена автор Scott Havard

До
После
Без изменений

Шаг Линий

[* icon_note] During reassembly, you will need to reinstall the Touch ID cable bracket. The top of the bracket needs to slide between the battery and Touch ID cable connector, and the front must latch down over the connector.
[* icon_reminder] Slide the top of the bracket over the Touch ID cable connector from left to right.
[* icon_reminder] During reassembly, be sure to orient the bracket so that the single-prong side faces the bottom of the phone and the side with two slits faces the battery.