Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту


Возврат к шагу #10

Редактировать с помощью Brent Hillyer -

Правка отклонена автор Scott Havard

Без изменений

Шаг Линий

[* icon_note] During reassembly, you will need to reinstall the Touch ID cable bracket. The top of the bracket needs to slide between the battery and Touch ID cable connector, and the front must latch down over the connector.
[* icon_reminder] Slide the top of the bracket over the Touch ID cable connector from left to right.
[* black] Slide is a little but of a misnomer, when looking at the pics. Place it on the top of the Touch ID cable and pop it down into place. If you try to 'slide' in from the side as shown, it just keeps jumping out of your tweezers. The reassembly video was great to use also.