Возврат к шагу #7
Отредактированно Sam Goldheart -
Правка одобрена автор Sam Goldheart
- До
- После
- Без изменений
Шаг Линий
| + | [* icon_note] Make sure the suction cup is firmly attached to the front panel assembly. |
|---|---|
| + | [* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case. |
| + | [* icon_note] Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices. |
| + | [* black] With a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while you pull up with the suction cup. |
| + | [* icon_note] There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly. |
Изображение 1
Нет предыдущего изображения
Добавлено