Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #7

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* icon_caution] The display is attached to the phone via clips and several ribbon cables, you will release the clips and '''separate the phone only enough to disconnect the cables'''. Go slowly and carefully to avoid damage.
[*
icon_note] Make sure the suction cup is firmly attached to the front panel assemblyassembly near the home button.
[* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assemblyhome button end of the display from the rear case.
[* icon_note] Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.

[* black] With a plastic opening tool, begin to gently pry the edges of the rear case down, away from the display assembly, while you pull up with the suction cup.
[* icon_note] There are several clips attaching the front panelicon_caution] Take your time and apply firm, constant force. The 5s display assembly to the rear case, so you may need to useis a combination of the suction cup and plastic opening tool to free the front panel assemblymuch tighter fit than most devices.
[* icon_caution] The display is attached to the phone via clips and several ribbon cables, you will release the clips and '''separate the phone only enough to disconnect the cables'''. Go slowly and carefully to avoid damage.
[*
icon_note] Make sure the suction cup is firmly attached to the front panel assemblyassembly near the home button.
[* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assemblyhome button end of the display from the rear case.
[* icon_note] Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.

[* black] With a plastic opening tool, begin to gently pry the edges of the rear case down, away from the display assembly, while you pull up with the suction cup.
[* icon_note] There are several clips attaching the front panelicon_caution] Take your time and apply firm, constant force. The 5s display assembly to the rear case, so you may need to useis a combination of the suction cup and plastic opening tool to free the front panel assemblymuch tighter fit than most devices.