Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #7

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* icon_caution] The displayfront panel is attached to the phone via clips and several ribbon cables, you will release the clips and '''separate the phone only enough to disconnect the cables'''. Go slowly and carefully to avoid damage.
[* icon_caution] The displayfront panel is attached to the phone via clips and several ribbon cables, you will release the clips and '''separate the phone only enough to disconnect the cables'''. Go slowly and carefully to avoid damage.
[* icon_note] Make sure the suction cup is firmly attached to the front panel assembly near the home button.
[* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the home button end of the displayfront panel from the rear case.
[* black] With a plastic opening tool, gently pry the edges of the rear case down, away from the displayfront panel assembly, while you pull up with the suction cup.
[* icon_caution] Take your time and apply firm, constant force. The 5s displayfront panel assembly is a much tighter fit than most devices.
[* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the home button end of the displayfront panel from the rear case.
[* black] With a plastic opening tool, gently pry the edges of the rear case down, away from the displayfront panel assembly, while you pull up with the suction cup.
[* icon_caution] Take your time and apply firm, constant force. The 5s displayfront panel assembly is a much tighter fit than most devices.