Почините Свои Вещи Сообщество Магазин

Возврат к шагу #9

Отредактированно Evan Noronha -

Правка одобрена автор Evan Noronha

До
После
Без изменений

Шаг Линий

[* black] Open the phone just enough to reveal the metal bracket covering the home button cable.
[* icon_caution] Do not open the phone too far or you risk damaging the home button cable, or the socket it plugs into. ***Keep the cable loose—if it is stretched taut, that's too far.***
[* black] Only the phone's original home button assembly will be capable of using the Touch ID functionality. ***If you rip the cable, installing a new home button will only restore ordinary home button functions, not the Touch ID features.***
[* black] Use the tip of a spudger to push the bracket free and remove it with tweezers.
-[* black] Make a note when reassembling this bracket that the single prong will face downwards toward the bottom of the phone and the side with two long slits will face upwards towards the top of the phone.
+[* icon_reminder] During reassembly, be sure to orient the bracket so that the single-prong side faces the bottom of the phone and the side with two slits faces the battery.