Перейти к основному содержанию

Changes to Step #13

Edit by Sam Goldheart

Правка одобрена автор Sam Goldheart

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Once the connector has been released, pull the home button end of the assembly away from the rear case, using the top of the phone as a hinge.
[* icon_note] During the next few steps, until you remove the front panel assembly,black] Open the display to about a 90º angle, and lean it against something to keep it supported atpropped up while you're working on the phone.
[* black] Add
a 90º anglerubber band to keep the display securely in relationplace while you work. This prevents undue strain on the display cables.
[* icon_note] In a pinch, you can use an unopened canned beverage
to hold the rear casedisplay.
[* icon_note] During the next few steps, until you remove the front panel assembly,black] Open the display to about a 90º angle, and lean it against something to keep it supported atpropped up while you're working on the phone.
[* black] Add
a 90º anglerubber band to keep the display securely in relationplace while you work. This prevents undue strain on the display cables.
[* icon_note] In a pinch, you can use an unopened canned beverage
to hold the rear casedisplay.

Image 3

Нет предыдущего изображения

Добавлено