Перейти к основному содержанию

Changes to Step #13

Edit by Andrew Optimus Goldheart

Правка одобрена автор Andrew Optimus Goldheart

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Once the connector has been released, pull the home button end of the assembly away from the rear case.
[* black] Lift and rotate the front panel assembly up to about 90 degrees from the rear case.
[* icon_note] During the next few steps, until you remove the front panel assembly, keep it supported at about 90 degrees from the rear case.