Возврат к шагу #13
Отредактированно Sam Goldheart -
Правка одобрена автор Sam Goldheart
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Once the connector has been released, pull the home button end of the assembly away from the rear case. |
|---|---|
| - | [* black] Lift and rotate the front panel assembly up to about 90 degrees from the rear case. |
| - | [* icon_note] During the next few steps, until you remove the front panel assembly, keep it supported at about 90 degrees from the rear case. |
| + | [* black] Once the connector has been released, pull the home button end of the assembly away from the rear case, using the top of the phone as a hinge. |
| + | [* icon_note] During the next few steps, until you remove the front panel assembly, keep it supported at a 90º angle in relation to the rear case. |