История iPhone 5s Front Panel Assembly Replacement Шага #17

Возврат к шагу #17

Отредактированно Noel Herrera - 5 ноя 2016 г.

Правка отклонена автор Jeff Suovanen

+	[title] Cambio Pantalla Iphone SE
	[* black] Remove the following screws securing the front panel assembly cable bracket to the logic board:
	[* red] One 1.7 mm Phillips #000 screw
	[* orange] One 1.2 mm Phillips #000 screw
	[* yellow] One 1.3 mm Phillips #000 screw
	[* green] One more 1.7 mm Phillips #000 screw
	[* icon_note] This 1.7 mm screw tends to not be attracted to a magnetized screwdriver. Take care not to lose it when removing.
	[* icon_caution] It is especially important to keep track of your screws in this step for reassembly. Accidentally using the 1.3 mm screw or one of the 1.7 mm screws in the bottom right hole will result in significant damage to the logic board causing the phone to no longer boot properly.
	[* icon_caution] Be careful not to [guide\|25630\|over-tighten\|stepid=64986] the screws, and don't force them. If they don't fit easily when you are securing them, they may be the wrong size.