Возврат к шагу #17
Отредактированно proserv -
Правка отклонена автор Walter Galan
- До
- После
- Без изменений
Шаг Линий
| [* black] Remove the following screws securing the front panel assembly cable bracket to the logic board: | |
| [* red] Two 1.7 mm Phillips #000 screws | |
| [* orange] One 1.2 mm Phillips #000 screw | |
| [* yellow] One 1.3 mm Phillips #000 screw | |
| [* icon_note] This 1.3 mm screw tends to not be attracted to a magnetized screwdriver. Take care not to lose it when removing. | |
| + | [* icon_caution] Take great care NOT to use wrong length as this will for sure toast your logic board, traces under screw being danged will cause code 9, 14 type of errors |