Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #17

Редактировать с помощью Kyle Wiens -

Правка одобрена автор Kyle Wiens

До
После
Без изменений

Шаг Линий

[* black] Remove the following screws securing the front panel assembly cable bracket to the logic board:
[* red] Two 1.7 mm Phillips #000 screws
[* orange] One 1.2 mm Phillips #000 screw
[* yellow] One 1.3 mm Phillips #000 screw
[* icon_note] This 1.3 mm screw tends to not be attracted to a magnetized screwdriver. Take care not to lose it when removing.
[* [* icon_caution] It is especially important to keep track of your screws in this step for reassembly. Accidentally using one of the 1.7 mm screws in the bottom right hole will very likelymay result in major damage to the logic board.
[* [* icon_caution] It is especially important to keep track of your screws in this step for reassembly. Accidentally using one of the 1.7 mm screws in the bottom right hole will very likelymay result in major damage to the logic board.