Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #21

Редактировать с помощью William Borges -

Правка отклонена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] Finally, disconnect the LCD cable connector.
[* icon_caution] When reassembling your phone, the LCD cable may pop off the connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.
[* icon_caution] It's '''very important''' to actually disconnect the whole LCD assembly before replacing the battery, not doing so could result in you LCD burning out.