Возврат к шагу #13
Отредактированно Andrew Bookholt -
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Now that the lower edge of the board is free from the outer case, rotate the logic board toward yourself to expose its rear face. |
| + | [* icon_caution] The following connector has a tendency to stick in its socket. If so, insert a metal spudger into the gap between the connecter and its socket. Twist the spudger to separate the two components. |
| + | [* black] Carefully pull the optical drive connector away from its socket on the logic board. |
| + | [* icon_note] Pull the connector perpendicular to the face of the logic board. |