Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью Rachel Kangas -

Правка одобрена автор Rachel Kangas

До
После
Без изменений

Шаг Линий

[* black] We take out theThe internal wires with the plastic spudger. The four connectors visible onare connected to the logic board have clips on the ends toby small end clips. To release themthem, place the plastic spudger underneath the clip and gently detach it from the connector.
[* black] ThenNext, unscrew the four T8 Torx screw comes off nextscrews and we remove the platetop cover.
[* black] We take out theThe internal wires with the plastic spudger. The four connectors visible onare connected to the logic board have clips on the ends toby small end clips. To release themthem, place the plastic spudger underneath the clip and gently detach it from the connector.
[* black] ThenNext, unscrew the four T8 Torx screw comes off nextscrews and we remove the platetop cover.