Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #4

Редактировать с помощью Keith Yu -

Правка одобрена автор Keith Yu

До
После
Без изменений

Шаг Линий

[* red] Using the T9 Torx head, removeloosen, but, '''do not remove''' the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* icon_reminder] The internal structure will thenThese screws are spring-loaded and can come out; be released fromcareful to not lose them. If you don't fully loosen the case; however, unlike most screws,screw, then they will not come out ofcan stay on the deviceinternal structure.
[* red] Using the T9 Torx head, removeloosen, but, '''do not remove''' the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* icon_reminder] The internal structure will thenThese screws are spring-loaded and can come out; be released fromcareful to not lose them. If you don't fully loosen the case; however, unlike most screws,screw, then they will not come out ofcan stay on the deviceinternal structure.

Изображение 1

Старая версия

Новая версия