Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #4

Редактировать с помощью Rachel Kangas -

Правка одобрена автор Rachel Kangas

До
После
Без изменений

Шаг Линий

[* black] Locatered] Using the T9 Torx head, remove the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* red] Use the screwdriver extension and the T9 Torx head to unscrew the two screws.
[* black] Once unscrewed, they will release the
icon_reminder] The internal structure will then be released from the case. Unlikecase; however, unlike most screws, however, they will not come out of the device.
[* black] Locatered] Using the T9 Torx head, remove the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* red] Use the screwdriver extension and the T9 Torx head to unscrew the two screws.
[* black] Once unscrewed, they will release the
icon_reminder] The internal structure will then be released from the case. Unlikecase; however, unlike most screws, however, they will not come out of the device.