Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #4

Редактировать с помощью Keith Yu -

Правка одобрена автор Keith Yu

До
После
Без изменений

Шаг Линий

[* black] Remove the T8 Torx screwdriver head and replace it with the 60 mm extension; then, add the T9 Torx head.
[* red] Loosen, but '''do not remove''' the two screws at the bottom of the 1.2-inch wide gap in the middle of the internal structure.
[* icon_remindericon_note] These screws are spring-loaded and will stay in the device, even when loosened; however, it is still possible for them to be fully removed. Be careful to '''only partially loosen''' them.
[* icon_remindericon_note] These screws are spring-loaded and will stay in the device, even when loosened; however, it is still possible for them to be fully removed. Be careful to '''only partially loosen''' them.