Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #2

Редактировать с помощью Nathan Reeve -

Правка одобрена автор Nathan Reeve

До
После
Без изменений

Шаг Линий

[* black] There are three internal wires connected to the logic board by small end clips. There is one internal wire that is connected by a larger end clip. To release the small clips, place the flat end of the plastic spudger underneath the clip and gently lever it '''outward''' to detach it from the connector.
[* black] To release the larger clip, place the flat end of the plastic spudger on the side and lever it '''upward''' to slide it out of its little casing.
[* icon_caution] These clips are fairly delicate and will break if handled roughly. Handle them gently.

Изображение 1

Нет предыдущего изображения

Добавлено