Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #2

Редактировать с помощью Nathan Reeve -

Правка одобрена автор Nathan Reeve

До
После
Без изменений

Шаг Линий

[* icon_caution] Four black internal wires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. Handle the clips gently; they break easily.
[* icon_caution] Four black internal wires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. Handle the clips gently; they break easily.
[* black] To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''away from the center of the device'''.
[* black] To detach the large clip from its connector, place the flat end of the spudger on the clip and lever it '''upward''' out of the connector.