Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #3

Редактировать с помощью Jared Cooper -

Правка одобрена автор Jared Cooper

До
После
Без изменений

Шаг Линий

[* black] ExtractFlip the netbook over and extract the eight screws that secure the top cover in place with a PH1 screwdriver.
[* black] Using the flat end of the spudger or fingernail, pry stick, extrude the top cover away from the base by runningwedging the tool alongbetween the base and top covercover and run the tool along the side until the cover pops out.
[* black] CarefullyNext, carefully flip the top cover in front of the netbook to dislocate the touch-pad cablecable from the motherboard.
[* black] ExtractFlip the netbook over and extract the eight screws that secure the top cover in place with a PH1 screwdriver.
[* black] Using the flat end of the spudger or fingernail, pry stick, extrude the top cover away from the base by runningwedging the tool alongbetween the base and top covercover and run the tool along the side until the cover pops out.
[* black] CarefullyNext, carefully flip the top cover in front of the netbook to dislocate the touch-pad cablecable from the motherboard.