Перейти к основному содержанию

Изменения к шагу №6

Отредактированно Jenalina Santiago -

Правка одобрена автор Jenalina Santiago

Удален
Добавлено
Без изменений

Шаг Линий

[title] Reinstall the Heat-Sink Assembly
[* black] Place the heat-sink assembly back on its hinges.
[* black] Pivot the heat-sink assembly back to its original position and secure it with the two screws removed earlier.
[* black] Replace the floppy drive's ribbon cable (if you have one).
[* icon_note] '''NOTE:''' Be sure the heat-sink assembly is seated properly and secured tightly. If it is loose or uneven, it cannot absorb heat properly and could cause your PC to unexpectedly shut down to prevent overheating.

Изображение 1

Нет предыдущего изображения

Добавлено