Возврат к шагу #2
Отредактированно Tobias Isakeit -
Правка одобрена автор Tobias Isakeit
- До
- После
- Без изменений
Шаг Линий
| [title] Remove Connector Board | |
| [* black] Disconnect the flex connector by lifting it up with a spudger. | |
| [* red] Remove the three Phillips screws. Do not loose the washer at the bottom screw. | |
| - | [* black] Take out the connector board. Make sure to keep the black rubber pad underneath the board. |
| + | [* black] Take out the connector board. |
| + | [* icon_note] Make sure to keep the black rubber pad underneath the board. |