Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Griffin Paul -

Правка одобрена автор Griffin Paul

До
После
Без изменений

Шаг Линий

[* black] Use sixStarting at the wide base of the triangular sections, use the 10 mm nuts and bolts to attach two solar panel plates together andtogether. First hand tighten each bolt/nut pair, then secure them with nuts. Tighten each bolt withyour two 10 mm wrenches until securewrenches.
[* red] On the way to the center, skip installing a nut and bolt in the '''THIRD TO LAST''' drill hole. This is where you will attach the Pipe Ring Brackets later on.
[* black] Use sixStarting at the wide base of the triangular sections, use the 10 mm nuts and bolts to attach two solar panel plates together andtogether. First hand tighten each bolt/nut pair, then secure them with nuts. Tighten each bolt withyour two 10 mm wrenches until securewrenches.
[* red] On the way to the center, skip installing a nut and bolt in the '''THIRD TO LAST''' drill hole. This is where you will attach the Pipe Ring Brackets later on.

Изображение 1

Старая версия

Новая версия