Перейти к основному содержанию

Изменения к шагу №2

Отредактированно Griffin Paul -

Правка одобрена автор Griffin Paul

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Use sixStarting at the wide base of the triangular sections, use the 10 mm nuts and bolts to attach the two solar panel plates together and secure with nuts. Tightentogether. First, hand thread each bolt withbolt/nut pair, then use two 10 mm wrenches until securesecure them.
[* red] DO NOT install a nut and bolt in the '''THIRD TO LAST''' hole. This is where the Pipe Ring Bracket is attached later on
.
[* black] Use sixStarting at the wide base of the triangular sections, use the 10 mm nuts and bolts to attach the two solar panel plates together and secure with nuts. Tightentogether. First, hand thread each bolt withbolt/nut pair, then use two 10 mm wrenches until securesecure them.
[* red] DO NOT install a nut and bolt in the '''THIRD TO LAST''' hole. This is where the Pipe Ring Bracket is attached later on
.

Изображение 1

Старая версия

Новая версия