Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #3

Редактировать с помощью Griffin Paul -

Правка одобрена автор Griffin Paul

До
После
Без изменений

Шаг Линий

[* icon_note] OnceAfter firmly fastening the two reflective sections are firmly fastened together, return to the third hole which was left empty. In addition to a nut and bolt, you will also need a Pipe Ring Bracket. (Need'''(Need a photo of just the bracket)bracket)'''
[* red] Use a Attach a metal bracketInstall the 10mm nut/bolt combo again, this time with the bolt onalso passing through the third hole fromsingle holed side of the centerbracket. Hand tread and use 10mm wrenches to tighten.
[* icon_note] Be sure the bracket is '''NOT''' installed between each pairthe lips of panels.ethe two Reflective Dish sections, but on the outside.
[* icon_note] OnceAfter firmly fastening the two reflective sections are firmly fastened together, return to the third hole which was left empty. In addition to a nut and bolt, you will also need a Pipe Ring Bracket. (Need'''(Need a photo of just the bracket)bracket)'''
[* red] Use a Attach a metal bracketInstall the 10mm nut/bolt combo again, this time with the bolt onalso passing through the third hole fromsingle holed side of the centerbracket. Hand tread and use 10mm wrenches to tighten.
[* icon_note] Be sure the bracket is '''NOT''' installed between each pairthe lips of panels.ethe two Reflective Dish sections, but on the outside.