Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Griffin Paul -

Правка одобрена автор Griffin Paul

До
После
Без изменений

Шаг Линий

[* icon_note] Before you begin, be sure you have all parts and tools needed for assembly and a construction area that is at least two meters in diameter.
[* red] Lay two triangular sections side-by-side, with pointed edges and bases adjacent to each other. '''(Need a photo of side-by-side panels)'''
[* icon_note] Since the sections are not flat, it is advisable to prop one end up on a box or similar object to give more stability during assembly. '''(Need a photo of them propped up)'''
[* red] Lay two triangular sections side-by-side, with pointed edges and bases adjacent to each other. '''(Need a photo of side-by-side panels)'''
[* icon_note] Since the sections are not flat, it is advisable to prop one end up on a box or similar object to give more stability during assembly. '''(Need a photo of them propped up)'''