Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Jonathan -

Правка одобрена автор Jonathan

До
После
Без изменений

Шаг Линий

[* violetred] Remove the two (2) screws that hold down the rearward edge of the card with a Phillips PH0 screwdriver.
[* violetred] Remove the two (2) screws that hold down the rearward edge of the card with a Phillips PH0 screwdriver.
[* icon_note] The card is spring loaded at the receptacle, so unless you hold it down, it will spring up once the last screw is removed.
[* black] Allow the card to lift itself up, and then simply slide it out of the black receptacle.
[* icon_reminder] When putting the card back in, make sure it is fully seated in the receptacle before pushing it down to re-insert the screws.

Изображение 1

Старая версия

Новая версия