Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Amos Hine -

Правка одобрена автор Amos Hine

До
После
Без изменений

Шаг Линий

[* red] Remove the two 3.4mm screws that hold down the rearwardright edge of the card with a Phillips PH0 screwdriver.
[* icon_note] The card is spring loaded at the receptacle, so unlessreceptacle. Unless you hold it down, itthe card will spring up once the last screw isboth screws are removed.
[* black] Allow the card to lift itself up, and then simply slide it out of the black receptacle.
[* red] Remove the two 3.4mm screws that hold down the rearwardright edge of the card with a Phillips PH0 screwdriver.
[* icon_note] The card is spring loaded at the receptacle, so unlessreceptacle. Unless you hold it down, itthe card will spring up once the last screw isboth screws are removed.
[* black] Allow the card to lift itself up, and then simply slide it out of the black receptacle.
[* icon_reminder] When putting the card back in, make sure it is fully seated in the receptacle before pushing it down to re-insert the screws.