Перейти к основному содержанию

Возврат к шагу #12

Редактировать с помощью Will McLeod -

Правка одобрена автор Marty Rippens

До
После
Без изменений

Шаг Линий

[* black] Place the hydrolic jack back under the car and lift it off your block.
-[* black] remove the block and lower the car back to the ground.
-[* black] using a torque wrench, tighten the lug nuts.
+[* black] Remove the block and lower the car back to the ground.
+[* black] Tighten the lug nuts using the torque wrench
[* icon_note] Wheel lug should be torqued to 80ft/lb