Перейти к основному содержанию

Возврат к шагу #12

Редактировать с помощью Tyler Shafer -

Правка одобрена автор Marty Rippens

До
После
Без изменений

Шаг Линий

[* black] Place the hydrolic jack back under the car and lift it off your block.
[* black] Remove the block and lower the car back to the ground.
-[* black] Tighten the lug nuts using the torque wrench
+[* black] Further tighten the lug nuts using the torque wrench
[* icon_note] Wheel lug should be torqued to 80ft/lb