Перейти к основному содержанию

Возврат к шагу #12

Редактировать с помощью Olivia DeVos -

Правка одобрена автор Marty Rippens

До
После
Без изменений

Шаг Линий

-[* black] Place the hydrolic jack back under the car and lift it off your block.
-[* black] Remove the block and lower the car back to the ground.
-[* black] Further tighten the lug nuts using the torque wrench
-[* icon_note] Wheel lug should be torqued to 80ft/lb
+[* black] Place the hydraulic jack back under the car and lift it off the cinder blocks or jack stands.
+[* black] Remove the cinder blocks or jack stands and lower the car back to the ground.
+[* black] Further tighten the lug nuts using the torque wrench.
+[* icon_note] Tighten wheel lug to a torque of 80ft/lb.