Перейти к основному содержанию

Возврат к шагу #12

Редактировать с помощью Curtis Haley -

Правка одобрена автор Marty Rippens

До
После
Без изменений

Шаг Линий

[* black] Place the hydraulic jack back under the car and lift it off the cinder blocks or jack stands.
[* black] Remove the cinder blocks or jack stands and lower the car back to the ground.
[* black] Further tighten the lug nuts using the torque wrench.
-[* icon_note] Tighten wheel lug to a torque of 80ft/lb.
+[* icon_note] Tighten each nut with a torque wrench to a torque of 80ft/lb, with the following pattern to ensure proper tire alignment.