Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #3

Редактировать с помощью MacKinley -

Правка одобрена автор MacKinley

До
После
Без изменений

Шаг Линий

[* black] Use a multimeter to test the potential difference across the components. You will have to reinstall the batter and turn the device on to do this.
[* black] Use a multimeter to test the potential difference across the components. You will have to reinstall the batter and turn the device on to do this.
[* black] Put one of the pins on each side of the component. Read the value on the meter.
[* black] Each resistor has a predefined value that can be found using this page.[[Resistor|this page.]] Compare the results to the expected values.
[* black] The capacitors have there properly functioning values printed on them.
[* black]
If any values vary replace the resistorcomponent.
[* black] Each resistor has a predefined value that can be found using this page.[[Resistor|this page.]] Compare the results to the expected values.
[* black] The capacitors have there properly functioning values printed on them.
[* black]
If any values vary replace the resistorcomponent.

Изображение 1

Старая версия

Новая версия