Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #3

Редактировать с помощью Cameron Christensen -

На одобрении

До
После
Без изменений

Шаг Линий

[* red] You need detach the heat sink from the CPU. Locate the four clamps holding it down, two on each side.
[* icon_note] Taking off the clamps can be difficult. TakeUse a screwdriver and wedge it in betweento push down on the clamp andtop of the clip. Then insert a spudger below the heat sink to pry offpull it away from the clampsboard, releasing the heat sink.
[* icon_note] Taking off the clamps can be difficult. TakeUse a screwdriver and wedge it in betweento push down on the clamp andtop of the clip. Then insert a spudger below the heat sink to pry offpull it away from the clampsboard, releasing the heat sink.