Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #4

Редактировать с помощью Max -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Lift the fan shroud and fan straight up and out. Take care to disconnect the indicated connector
[* black] Now slide the entire board back approximately 5mmRemove the heatsink clamps with a flathead screwdriver and lift it offdo the chassissame for the other side.
[* icon_caution] This can very difficult! It took us a great dealLift off the heatsink and remove the 4 screws of force to get the board loose. Take great care toCPU board.
[* black] There are 4 pins: remove the 3 pins near the RAM but
not damage the boardpin nearest You.
[* black] You are now ready to slide gently (and without ANY difficult) the motherboard. Lift up and the game is done
.
[* black] Now slide the entire board back approximately 5mmRemove the heatsink clamps with a flathead screwdriver and lift it offdo the chassissame for the other side.
[* icon_caution] This can very difficult! It took us a great dealLift off the heatsink and remove the 4 screws of force to get the board loose. Take great care toCPU board.
[* black] There are 4 pins: remove the 3 pins near the RAM but
not damage the boardpin nearest You.
[* black] You are now ready to slide gently (and without ANY difficult) the motherboard. Lift up and the game is done
.

Изображение 2

Нет предыдущего изображения

Добавлено

Изображение 3

Нет предыдущего изображения

Добавлено