Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Nicolas Siemsen -

Правка одобрена автор Nicolas Siemsen

До
После
Без изменений

Шаг Линий

[* black] You can now see the trunk actuator. It connects to the lock mechanism by the metal rod with a spring.
[* red] To remove the actuator begin by removing the two hex head screws. They should be 8mm heads.
-[* black] Then disconnect the two vacuum lines, making note of their orientation. One is for lock (red stripe), one is for unlock (green stripe).
+[* yellow] Then disconnect the two vacuum lines, making note of their orientation. One is for lock (red stripe), one is for unlock (green stripe).
+[* green] Finally, pull the metal armature of the actuator off of the lock mechanism. It pulls off in the direction of the vacuum actuator body.

Изображение 1

Старая версия

Новая версия