Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Elohino Theodore -

Правка одобрена автор Geoff Wacker

До
После
Без изменений

Шаг Линий

[* black] Open the screen up all the way (180deg) so the LCD is laying flat on the work surface parallel to the keyboard/'''Open the screen up all the way to 180 degrees. The LCD screen should be laying flat as well as the keyboard.'''keyboard.
[* black] Open the screen up all the way (180deg) so the LCD is laying flat on the work surface parallel to the keyboard/'''Open the screen up all the way to 180 degrees. The LCD screen should be laying flat as well as the keyboard.'''keyboard.
[* black] Use a flat head screwdriver to pry the D620 nameplate off from the right side edge.
[* black] Gently lift the nameplate off from right to left to expose the 3 keyboard retaining screws/'''On'On the right and left sides of the nameplate gently lift it to show the 3 keyboard retaining screws.'''screws.
[* red] Remove the 3 screws/'''Remove the 3 screws with the screwdriver.'''screwdriver.
[* black] Gently lift the nameplate off from right to left to expose the 3 keyboard retaining screws/'''On'On the right and left sides of the nameplate gently lift it to show the 3 keyboard retaining screws.'''screws.
[* red] Remove the 3 screws/'''Remove the 3 screws with the screwdriver.'''screwdriver.