Возврат к шагу #1
Редактировать с помощью Elohino Theodore -
Правка одобрена автор Jeff Suovanen
- До
- После
- Без изменений
Шаг Линий
[* black] Open the screen up all the way (180deg) so the LCD is laying flat on the work surface parallel to the |
[* black] Open the screen up all the way (180deg) so the LCD is laying flat on the work surface parallel to the |
[* black] Use a flat head screwdriver to pry the D620 nameplate off from the right side edge. |
[* black] Gently lift the nameplate off from right to left to expose the 3 keyboard retaining [* red] Remove the 3 screws/'''Remove the 3 screws with the screwdriver.''' |
[* black] Gently lift the nameplate off from right to left to expose the 3 keyboard retaining [* red] Remove the 3 screws/'''Remove the 3 screws with the screwdriver.''' |