Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #14

Редактировать с помощью Reed Crosby -

Правка одобрена автор Reed Crosby

До
После
Без изменений

Шаг Линий

[* blacktitle] Heatsink Unscrewing
[* red
] With a Phillips screwdriver, loosenremove the four screws.
[* black] Loosen each screw a little bit, going from 1 then to 2 then to 3 and then to 4. Keep doing this until they are all loose.
[*
4 screws on the heatsink, in order of the numbers of the metal.
[*
icon_caution] Loosening one screw without the other screws may damage the logic boardout of order can be damaging.
[* blacktitle] Heatsink Unscrewing
[* red
] With a Phillips screwdriver, loosenremove the four screws.
[* black] Loosen each screw a little bit, going from 1 then to 2 then to 3 and then to 4. Keep doing this until they are all loose.
[*
4 screws on the heatsink, in order of the numbers of the metal.
[*
icon_caution] Loosening one screw without the other screws may damage the logic boardout of order can be damaging.