Перейти к основному содержанию

Возврат к шагу #12

Отредактированно Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

-[* black] Remove the following screws securing the front panel assembly cable bracket to the logic board:
- [* red] Two 1.3 mm Phillips #000 screws
- [* orange] One 1.7 mm Phillips #000 screw
- [* yellow] One 3.25 mm Phillips #000 screw
+[* black] Remove the following Phillips #000 screws securing the front panel assembly cable bracket to the logic board:
+ [* red] Two 1.3 mm screws
+ [* orange] One 1.7 mm screw
+ [* yellow] One 3.25 mm screw