Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью armstd -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* icon_note] If you're installing a new front panel assembly, it may need the following preparation:
[* red] Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.
[* orange] Remove the small piece of adhesive backing from the digitizer cable.
-[* black] Make sure all copper is covered on the new repalcement screen as once fitted without this the screen will move randomly.
+[* black] Make sure all copper is covered on the new replacement screen as once fitted without this the screen will move randomly.