Перейти к основному содержанию

Возврат к шагу #5

Редактировать с помощью Nicolas Siemsen -

Правка одобрена автор Nicolas Siemsen

Без изменений

Шаг Линий

[* black] The hard line on this side goes down through a rubber grommet in the fender.
[* black] Pull the line up and out of this grommet.
+[* black] You can now begin to install the replacement brake line.
+[* black] Since you opened up the brake system to the air you will need to bleed the system before driving. Never drive a car after working on the brake lines without first bleeding it properly. [http://www.ifixit.com/Guide/Mercedes+W123+Brake+Fluid+Flush-Bleeding/21442|See the brake flush/bleeding guide for guidance on this process.]