Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #4

Редактировать с помощью KaylaYoung -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* icon_caution] Be Extremely Careful in this next step as if you pry the hinge off too fast you may rip the connector between the logic board and screen.
[*
black] Carefully wedge a plastic opening tool between the hinge on the body as shown in the highlitedhighlighted area in picture twoone. (be sure to insert the wedge into the right hinge when looking down onto the phonephone, as in the picture).
[* black] Slowly pry the hinge off the body as shown being done in the thirdsecond picture and set the phone down when you get toafter done with this step. The phone may also be pried apart with your hands.
[* black] Because you are replacing the display screen with a new one, it is ok if the connector strip tears because the new display screen will have its own connector strip.

[* black] Next slide the connector cable out of the slot on the back side of the phone and the screen will be disconnected from the key pad body. (PICTURE)
[* icon_caution] Be Extremely Careful in this next step as if you pry the hinge off too fast you may rip the connector between the logic board and screen.
[*
black] Carefully wedge a plastic opening tool between the hinge on the body as shown in the highlitedhighlighted area in picture twoone. (be sure to insert the wedge into the right hinge when looking down onto the phonephone, as in the picture).
[* black] Slowly pry the hinge off the body as shown being done in the thirdsecond picture and set the phone down when you get toafter done with this step. The phone may also be pried apart with your hands.
[* black] Because you are replacing the display screen with a new one, it is ok if the connector strip tears because the new display screen will have its own connector strip.

[* black] Next slide the connector cable out of the slot on the back side of the phone and the screen will be disconnected from the key pad body. (PICTURE)