Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #8

Редактировать с помощью Walter Galan -

Правка одобрена автор Walter Galan

До
После
Без изменений

Шаг Линий

[* black] Insert wisdom hereIn the following steps, you will be using a microwave to heat the iOpener, an insulated bag that will transfer heat to the adhesive strips on the back of the iPhone's battery.
[* black] Place the iOpener in the microwave and microwave it for '''one minute''' on the highest power setting.
[* icon_caution] Be careful when handling the bag, as it will be quite hot.
[* black] Lay an iOpener flat on the backside of the iPhone, smoothing it out so that there is good contact between the back of the iPhone and the iOpener.
[* black] Let the bag sit on the iPhone for approximately 90 seconds before attempting to remove the battery
.
[* black] Insert wisdom hereIn the following steps, you will be using a microwave to heat the iOpener, an insulated bag that will transfer heat to the adhesive strips on the back of the iPhone's battery.
[* black] Place the iOpener in the microwave and microwave it for '''one minute''' on the highest power setting.
[* icon_caution] Be careful when handling the bag, as it will be quite hot.
[* black] Lay an iOpener flat on the backside of the iPhone, smoothing it out so that there is good contact between the back of the iPhone and the iOpener.
[* black] Let the bag sit on the iPhone for approximately 90 seconds before attempting to remove the battery
.