Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #8

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[title] Battery removal with latent adhesive
[* black] Follow our [guide|11677|iOpener heating instructions] or use a hair dryer to safely warmheat the adhesive securing your battery to the rear case.
[* icon_caution] Be careful when handling the bag, as it will be quite hot.
[*

[*
black] Lay the iOpener flat on the backside of the iPhone to the right of the camera. Smooth it out so that there is good contact between the back of the iPhone and the iOpener.
[*

[*
black] Let the bag sit on the iPhone for approximately 90 seconds before attempting to remove the battery.
[* black] If using a hair dryer or heat gun, heat the back of the iPhone until it's slightly too hot to touch.
[* icon_caution] Do not apply heat directly to
the battery.
[* black] Follow our [guide|11677|iOpener heating instructions] or use a hair dryer to safely warmheat the adhesive securing your battery to the rear case.
[* icon_caution] Be careful when handling the bag, as it will be quite hot.
[*

[*
black] Lay the iOpener flat on the backside of the iPhone to the right of the camera. Smooth it out so that there is good contact between the back of the iPhone and the iOpener.
[*

[*
black] Let the bag sit on the iPhone for approximately 90 seconds before attempting to remove the battery.
[* black] If using a hair dryer or heat gun, heat the back of the iPhone until it's slightly too hot to touch.
[* icon_caution] Do not apply heat directly to
the battery.